Beam Flexural Capacity — Strain Compatibility Method

NSCP 2015 Section 422.2 (≡ ACI 318M-14)

Parametrization

f'c (MPa)

fy (MPa)

Es (MPa)

Mu demand (kN·m) — optional Used by the calculation sheet. Left blank, the sheet reports capacity and draws no verdict rather than inventing one.

Section Type

Width, b (mm)

Height, h (mm)

Plate width = section top/bottom face width. Set thickness to 0 to disable.

Top plate t (mm)

Bottom plate t (mm)

Plate Fy (MPa)

Plate Es (MPa)

Auto Idle

Ctrl/Cmd + Enter runs from anywhere on the page

Set the parameters on the left, then press Update or hit Ctrl/Cmd + Enter.

The sheet below is A4 width on screen, so what you read is what prints.

Design Check